  | Paoletti, M., & Schäfer, M. (12 September 2023). Load transfer of circular reinforced composite dowel connector: a comparison of existing analytical equations. ce/papers, 6 (3-4), 101-106. doi:10.1002/cepa.2613  Peer reviewed |
Zogu, P., & Schäfer, M. (September 2023). Determination of overall factor for the application of the General Method based on plastic and strain-limited N-M interaction for composite compression members [Paper presentation]. Eurosteel 2023, Amsterdam, Netherlands. |
Zogu, P., & Schäfer, M. (08 June 2023). Structural Reliability Assessment of Composite Columns in Steel and Concrete using Non-linear Finite Element Analysis [Poster presentation]. 10th International Workshop on Applied Probability, Thessaloniki, Greece. |
 | Paoletti, M., & Schäfer, M. (2023). Load Introduction Zone Connection in Composite Columns. Young Engineers Colloquium Dresden 2023. Peer reviewed |
  | Fodor, J., Akbarieh, A., Schäfer, M., & Teferle, F. N. (2023). Sustainability assessment of a novel reusable and demountable steel-concrete composite floor system. In ECPPM 2022 - eWork and eBusiness in Architecture, Engineering and Construction 2022. Norway: CRC Press. Peer reviewed |
 | Dakhili, K., Kebig, T., Schäfer, M., Maas, S., Bender, M., & Zürbes, A. (2023). Temperature effect on static and quasi-static bridge measurements. In Life-Cycle of Structures and Infrastructure Systems. doi:10.1201/9781003323020-387 Peer reviewed |
 | Zanon, R., Schäfer, M., Ruiz, G., & de la Rosa, A. (08 December 2022). Steel-fibre reinforced concrete in compo-site structures as a mean to increase re-sistance and ductility. Stahlbau, 91 (12), 801-811. doi:10.1002/stab.202200070 Peer reviewed |
 | Ruiz, G., de la Rosa, A., Poveda, E., Zanon, R., Schäfer, M., & Wolf, S. (2022). Compressive behaviour of steel-fibre reinforced concrete in Anne2605-1729x L of new Eurocode 2. Hormigón y Acero. doi:10.33586/hya.2022.3092 Peer reviewed |
 | Yolacan, F., & Schäfer, M. (12 July 2022). Determination of Slip Factor between CNC-Cut Serrated Surfaces of S355J2 Grade Steel Plates. Buildings, 12 (995). doi:10.3390/buildings12070995 Peer Reviewed verified by ORBi |
 | Schäfer, M. (05 May 2022). Aktueller Stand der Überarbeitung von EN 1994 - Eurocode 4 [Paper presentation]. Münchner Stahlbautage 2022, München, Germany. |
 | Schäfer, M. (29 March 2022). Slim-Floor Bauweise – Bemessung und Ausführung [Paper presentation]. Dresdner Stahlbaufachtagung 2022, Technical University Dresden, Germany. |
  | Schäfer, M., Hicks, S., Kurz, W., Banfi, M., & Martin, P.-O. (2022). Eurpean Mandate M515, CEN/TC250/SC4.T6 - Background Documents for prEN 1994-1-1. (CEN/TC250/SC4 N2294-N2302, Background Documents prEN 1994-1-1:11-2021). Brussels, Belgium: CEN. |
 | Dakhili, K., Kebig, T., Schäfer, M., Maas, S., Bender, M., & Zürbes, A. (2022). Bridge damage assessment based on static and dynamic flexibility matrices. In Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability. doi:10.1201/9781003322641-35 Peer reviewed |
 | Schäfer, M., Zhang, Q., & Bergmann, M. (December 2021). Bemessung von Verbundstützen – Update prEN 1994-1-1. Stahlbau, 90 (12), 903-912. doi:10.1002/stab.202100089 Peer reviewed |
| Schäfer, M., Hicks, S., Kurz, W., Banfi, M., & Martin, P.-O. (2021). Draft for second generation of prEN 1994-1-1, November 2021. (CEN/TC250/SC4 N2254-N2259, prEN 1994-1-1: 11-2021). Brussels, Belgium: CEN. |
 | Akbarieh, A., Schäfer, M., Waldmann, D., & Teferle, F. N. (13 October 2021). Post-Urban Mining Automation and Digitalisation for a Closed- Loop Circular Construction [Poster presentation]. 38th International Conference of CIB W78, Luxembourg, Luxembourg. |
 | Anwaar, O., Schäfer, M., & Zhang, Q. (2021). Non-linear Analysis of Circular Composite Columns. In I. Burgess (Ed.), Special Issue: Proceedings of Eurosteel 2021: Sheffield - Steel's coming home (Volume 4, Issue 2-4, pp. 691-699). Wiley Online Library. doi:10.1002/cepa.1350 Peer reviewed |
 | Zhang, Q., & Schäfer, M. (2021). Partial shear diagram of slim-floor beams. In I. Burgess (Ed.), Special Issue: Proceedings of Eurosteel 2021: Sheffield - Steel's coming home (Volume 4, Issue 2-4, pp. 685-690). Wiley Online Library. doi:10.1002/cepa.1349 Peer reviewed |
 | Ergun, O., & Schäfer, M. (2021). Numerical investigation for the design of rectangular concrete encased steel composite columns. In I. Burgess (Ed.), Special Issue: Proceedings of Eurosteel 2021: Sheffield - Steel's coming home (Volume 4, Issue 2-4, pp. 606-613). Wiley Online Library. doi:10.1002/cepa.1338 Peer reviewed |
 | Fodor, J., & Schäfer, M. (2021). Behavior of downstand simply supported steel-concrete composite beam applying friction based demountable shear connection. In I. Burgess (Ed.), Special Issue: Proceedings of Eurosteel 2021: Sheffield - Steel's coming home (Volume 4, Issue 2-4, pp. 809-816). Wiley Online Library. doi:10.1002/cepa.1365 Peer reviewed |
 | Schäfer, M., Bender, M., Zahlten, W., Koziol, P., & Lorenc, W. (2021). Digitalization in Construction, Computer-based Design for Structural Elements, PArt 2: Analyses and Validation of Compliance to EuroCodes. (Augutst 2021, University of Luxembourg, Trier University of applied Science, Bergische Universität Wuppertal, Wroclae University of Science and Technology, Computer based design for structural elements in accordance with Eurocodes). Trier, Germany: Trier University of applied science/University of Luxembourg. |
 | Schäfer, M., Zhang, Q., Zogu, P., Bergmann, M., Ergun, O., Fodor, J., & Fejzic, E. (2021). Non-linear design for composite structures in steel and concrete in reference to Eurocode 4, Part 1-1. (Unilu - University of Luxembourg, Luxembourg, Composite Structures in steel and concrete - nonlinear design). |
 | Schäfer, M., Bender, M., Zahlten, W., Koziol, P., & Lorenc, W. (2021). Digitalization in Construction, Computer-based Design for Structural Elements - BIM and structural engineering - Part 1: Impact of digitalization on structural engineering in the future. (August 2021, University of Luxembourg, Trier University of applied Science, Bergische Universität Wuppertal, Wroclae University of Science and Technology, BIM and structural engineering - Impact of digitalization on structural engineering in the future). Trier/Luxemburg, Germany: University of applied Science Trier/Univ. of Luxemburg. |
 | Kebig, T., Nguyen, V. H., Bender, M., Schäfer, M., & Maas, S. (2021). Repeatability and precision of different static deflection measurements on a real bridge-part under outdoor conditions in view of damage detection. In A. Cunha & E. Caetano (Eds.), Proceedings of the 10th International Conference on Structural Health Monitoring of Intelligent Infrastructure, SHMII 10. Peer reviewed |
 | Schäfer, M., Zhang, Q., Braun, M., & Banfi, M. (May 2021). Limitations of plastic bending resistance for composite beams deviated from strain-limitation. Journal of Constructional Steel Research, 180 (106562). doi:10.1016/j.jcsr.2021.106562 Peer Reviewed verified by ORBi |
 | Akbarieh, A., Carbone, W., Schäfer, M., Waldmann, D., & Teferle, F. N. (09 December 2020). Extended Producer Responsibility in the Construction Sector through Blockchain, BIM and Smart Contract Technologies [Poster presentation]. The World Congress on Sustainable Technologies (WCST-2020), Virtual, United Kingdom. |
 | Zilian, A., Waldmann, D., Hertweck, F., Teferle, F. N., Schäfer, M., & Scholzen, F. (16 October 2020). Eco-construction for sustainable development (Econ4SD) – Konzepte für Materialbanken [Paper presentation]. 24. Dresdner Baustatik-Seminar, Dresden, Germany. |
Schäfer, M., & Hanswille, G. (2020). Entwicklung der Europäischen Normung im Verbundbau. In G. Siebert, Festschrift zum 70. Geburtstag von Prof. Dr.-Ing. I. Mangerig (pp. 63-71). München, Germany: Universität der Bundeswehr. Peer reviewed |
 | Zilian, A., Waldmann, D., Hertweck, F., Teferle, F. N., Schäfer, M., & Scholzen, F. (2020). Eco-construction for sustainable development (Econ4SD) – Konzepte für Materialbanken. In M. Kaliske (Ed.), 24. Dresdner Baustatik-Seminar: Reality - Modeling - Structural Design (pp. 21). Peer reviewed |
Hanswille, G., Schäfer, M., & Bergmann, M. (2020). Eurocode 4 - DIN EN 1994-1-1 Bemessung und Konstruktion von Verbundtragwerken aus Stahl und Beton. (1. Edition). Berlin, Germany: Beuth. |
| Schäfer, M., Hicks, S., Banfi, M., Kurz, W., & Martin, P.-O. (2020). Draft prEN 1994-1-1: 042020 + comments, Document. (CEN/TC250/SC4 N2048, prEN 1994-1-1: 042020). Brussels, Belgium: CEN. |
 | Claßen, M., Kurz, W., Schäfer, M., & Hegger, J. (October 2019). A mechanical design model for steel and concrete composite members with web openings. Engineering Structures, Engineering Structures 197:109417 (109417). doi:10.1016/j.engstruct.2019.109417 Peer reviewed |
 | Yolacan, T. F., & Schäfer, M. (2019). Investigation of the moment redistribution for steel concrete continuous beams. In The 14th Nordic Steel Construction Conference (pp. 251-256). Wiley Online Library. Peer reviewed |
 | Zhang, Q., Schäfer, M., & Kurz, W. (2019). Impact of reinforcement to moment resistance of composite slabs. In The 2019 World Congress on Advances in Structural Engineering and Mechanics (ASEM19). Peer reviewed |
 | Schäfer, M., Zhang, Q., Braun, & Banfi, M. (2019). PLASTIC DESIGN FOR COMPOSITE BEAMS - ARE THERE ANY LIMITS? In Proceedings of the 9th International Conference on Steel and Aluminium Structures ICSAS19. Peer reviewed |
 | Braun, M., Obiala, R., Schäfer, M., Kuhlmann, U., Reif, F., & Odenbreit, C. (July 2019). Tragverhalten von CoSFB-Dübeln. (LAJ19.B). Stahlbau, 88(2019) (Heft 7). doi:10.1002/stab.201900036 Peer Reviewed verified by ORBi |
 | Schäfer, M., & Zhang, Q. (July 2019). Zur dehnungsbegrenzten Momententragfähigkeit von Flachdecken in Verbundbauweise. Stahlbau, 88(2019) (Heft 7). doi:10.1002/stab.201900051 Peer Reviewed verified by ORBi |
 | Schäfer, M., & BRaun, M. (July 2019). Entwicklung der Slim-Floor-Bauweise in Europa. Stahlbau, 88(2019) (7). doi:10.1002/stab.201900049 Peer Reviewed verified by ORBi |
 | Schäfer, M., & Braun, M. (July 2019). Chancen und Herausforderungen für Stahl-Verbundkonstruktionen im modernen Geschossbau. Stahlbau, 88 (7). doi:10.1002/stab.201970703 Peer Reviewed verified by ORBi |
 | Schäfer, M., Banfi, M., Hicks, S., Kurz, W., & Martin, P.-O. (2019). Project Team SC4 T6 interim reports April 2019 Draft EN 1994-1-1. (CEN/TC 250/SC 4 N 1941). |
 | Schäfer, M. (February 2019). European design code for composite structures in steel and concrete - Historical development and investigation in the second generation of Eurocode 4. Steel Construction, 12 (2019) Heft 2 (02/2019), 70-81. doi:10.1002/stco.201800031 Peer reviewed |
 | Zhang, Q., & Schäfer, M. (2019). Slim-floor beam bending moment resistance considering partial shear connection. In F. Wald & M. Jandera, Stability and Ductility of Steel Structures 2019 (pp. 1326-1333). CRC Press. |
Schäfer, M., & Mensinger, M. (11 October 2018). Entwicklung der zweiten Generation des Eurocodes 4 - Neuerungen in der Bemessung für Verbundtragwerke aus Stahl und Beton [Paper presentation]. 39. Deutscher Stahlbautag 2018, Duisburg, Germany. |
Schäfer, M. (Ed.), Zhang, Q. (Ed.), Bender, M. (Ed.), Wong Ho Fai (Ed.), Luk Sung Hei (Ed.), Santos-Ferreira, K. (Other coll.), Yolacan, T. F. (Other coll.), Ollinger, N. (Other coll.), ANWAAR,, O. (Other coll.), OESTREICHER, L. (Other coll.), & Nikolay, H. (Other coll.). (2018). AVEC BNT - Analysis and Comparison of European and Chinese Design Codes - B. Script & Examples. Trier, Germany: BNT. |
 | Schäfer, M., & Zhang, Q. (2018). Particularities for plastic design of composite beams with deep plastic neutral axis. In 12th Japanese-German Bridge Symposium (pp. 10). Munich, Germany: Universität der Bundeswehr. Peer reviewed |
 | Zhang, Q., Schäfer, M., & Santos-Ferreira, K. (2018). Comparison of Design Codes for Composite Beams of Steel and Concrete in Europe and China. In 12th Japanese-German Bridge Symposium (pp. 10). Peer reviewed |
Schäfer, M. (31 August 2018). Development of Eurocode 4 [Paper presentation]. Eurocode Seminar, Luxemburg - Kirchberg, Luxembourg. |
Zhang, Q., & Schäfer, M. (31 August 2018). Comparison of Eurocodes and the Chinese standards - Design basics and Design of Composite structure [Paper presentation]. Seminar für Ingenieure - Massiv- und Verbundtragwerke, Luxemburg - Kirchberg, Luxembourg. |
Schäfer, M. (31 August 2018). Bemessung nach Eurocode 4 und Sonderaspekte [Paper presentation]. Eurocode Seminar, Luxemburg - Kirchberg, Luxembourg. |
Schäfer, M. (30 August 2018). Bemessung nach Eurocode 4 und Sonderaspekte [Paper presentation]. 4. Trierer Bauseminar - Stahlbeton- und Verbundtragwerke, Trier, Germany. |
Schäfer, M. (30 August 2018). Aktuelle Entwicklungen der Eurocode Normen [Paper presentation]. 4. Trierer Bauseminar - Stahlbeton- und Verbundtragwerke, Trier, Germany. |
Zhang, Q., & Schäfer, M. (30 August 2018). Comparison of Eurocodes and the Chinese standards - Design basics and Design of Composite structure [Paper presentation]. 4. Trierer Bauseminar - Stahlbeton- und Verbundtragwerke, Trier, Germany. |
Schäfer, M., & Fodor, J. (2018). Design according to Eurocode 4 and special aspects [Paper presentation]. AVEC BNT - Eurocode Workshop, RIGA, Latvia. |
 | Schäfer, M., & Braun, M. V. (28 June 2018). Slim-Floor Beams - application of shallow floor constructions [Paper presentation]. 12th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2018), València, Spain. |
 | Zhang, Q., & Schäfer, M. (2018). Comparison of design for composite columns in steel and concrete according to Eurocode 4 and Chinese design codes. In M. Romero, Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2018) (pp. 8). Valencia, Spain: Universitat Politècnica de València. Peer reviewed |
Schäfer, M., & Hanswile, G. (22 June 2018). Kommentar zu DIN EN 1994-1-1, Verbundtragwerke aus Stahl und BEton [Paper presentation]. Stahlbau-Kalendertag 2018, Stuttgart, Germany. |
Schäfer, M. (22 June 2018). Flachdecken in Verbundbauweise Bemessung und Konstruktion von Slim-Floor-Trägern [Paper presentation]. Stahlbau-Kalendertag 2018, Stuttgart, Germany. |
Zhang, Q., & Schäfer, M. (2018). Longitudinal Shaer in Composite Beams. In Young Engineers Colloquium Munich 2018 (pp. 38-39). München, Germany: Universität der Bundeswehr. |
 | Santos Ferreira, K., Zhang, Q., & Schäfer, M. (2018). Analysis and Comparison of Eurocodes and Chinese codes of Design. In Young Engineers Colloquium Munich 2018 (pp. 82 - 83). Munich, Germany: Universität der Bundeswehr. Peer reviewed |
 | Zhang, Q., & Schäfer, M. (06 March 2018). Comparison of design for steel and concrete beams according to EN 1994-1-1 and Chinese JGJ138-2016 [Paper presentation]. 21. DASt-Forschungskolloquium, Kaiserslautern, Germany. |
Hanswille, G., Schäfer, M., & Bergmann, M. (2018). Verbundtragwerke aus Stahl und Beton, Bemessung und Konstruktion - Kommentar zu DIN EN 1994-1-1. In U. Kuhlmann (Ed.), Stahlbaukalender 2018 (20, pp. 87-329). Berlin, Germany: Ernst & Sohn, Wiley Brand. Peer reviewed |
Schäfer, M., Braun, M. V., & Hauf, G. (2018). Flachdecken in Verbundbauweise - Bemessung und Konstruktion von Slim-Floor Trägern. In U. Kuhlmann (Ed.), Stahlbaukalender 2018 (20, pp. 631-741). Berlin, Germany: Ernst & Sohn, Wiley Brand. Peer reviewed |
 | Zhang, Q., & Schäfer, M. (2017). Comparison of design for composite beams in steel and concrete according to Eurocode 4 and Chinese Design Codes. In XI Conference on Steel and Composite Construction (Wiley Online Library). United Kingdom: Wiley Online. Peer reviewed |
Banfi, M., Mensinger, M., Schäfer, M., Santos, J. P., Ortega, M., & Wojciech, L. (2017). CEN/TC250/SC4.T1: Second Generation of Eurocode 4: Introduction and Amendments to Final Draft October 2017. (Documents CEN/TC250/SC4 N1822 to CEN/TC250/SC4 N1809). United Kingdom: CEN. |
 | Schäfer, M. (2017). Limits of plastic design for composite beams. In Eurosteel 2017 (pp. 11). Berlin, Germany: Ernst & Sohn/Wiley. Peer reviewed |
 | Schäfer, M. (2017). Review of plastic moment resistance for compsite beams - Development of second generation of Eurocode 4. In R. Leon, 8th International Conference on Composie Structures in Steel and Concrete (pp. 1-12). Peer reviewed |
 | Schäfer, M. (10 May 2017). Entwicklung der Bemessung nach EC4 im Stahlverbundbau [Paper presentation]. 36. Stahlbauseminar, Rheine, Germany. |
Schäfer, M. (08 May 2017). Bericht zur Tätigkeit des Projectteams CEN/TC250/SC4.T1 - Neuerungen zur Bemessung im Verbundbau [Paper presentation]. 56. Sitzung des Arbeitsausschusses Verbundbau, University of Stuttgart, Germany. |
Banfi, M., Mensinger, M., Schäfer, M., Santos, J. P., Ortega, M., & Wojciech, L. (2017). CEN/TC250/SC4.T1: Second Generation of Eurocode 4: Introduction and Amendments to Second Draft April 2017. (Documents: CEN/TC250/SC4 N1746 to CEN/TC250/SC4 N1756). United Kingdom: CEN. |
 | Schäfer, M., & Banfi, M. (2017). Background Report to EN 1994 - Plastic moment resistance of composite beams. (CEN/TC 250/SC 4 N 1755). |
Schäfer, M. (March 2017). Stahlverbundkonstruktionen im Hochbau - Entwicklungen in der Normung [Paper presentation]. Dresdner Stahlbaufachtagung 2017, Technische Universität Dresden, Germany. |
Schäfer, M. (16 January 2017). Effiziente Gebäudelösungen in Stahl- und Verbundbauweise - eine Alternative für innerstädtische Projekte [Paper presentation]. Bau 2017, Münschen, Germany. |
 | Schäfer, M., Braun, M., Radermacher, C., Hettinger, R., Pesch, A., & Benyahia, F. (December 2016). Symbiose aus Stahl und Stein - innovative Lösungen. Revue Technique Luxembourgeoise, 04/2016. |
 | Schäfer, M., Radermacher, C., Braun, M., Hettinger, R., Pesch, A., & Benyahia, F. (December 2016). Eine innovative Stahlverbundlösung für komplexe innerstädtische Bauprojekte. Stahlbau, 04/16, 13-16. Peer reviewed |
 | Schäfer, M., Radermacher, C., Braun, M., Hettinger, R., Pesch, A., & Benhyahia, F. (01 October 2016). Symbiose aus Stahl und Stein. Stahlbau, Stahlbau 85 (Heft 10), 659 - 669. doi:10.1002/stab.201610422 Peer Reviewed verified by ORBi |
Banfi, M., Mensinger, M., Ortega, M., Santos, J. P., Schäfer, M., & Wojciech, L. (2016). CEN/TC250/SC4.T1: Second Generation of Eurocode 4: Assessment of Nationally Determined Parameters in EN 1994. (Document: CEN/TC250/SC4 N1676). United Kingdom: CEN. |
Banfi, M., Mensinger, M., Schäfer, M., Santos, J. P., Ortega, M., & Wojciech, L. (2016). CEN/TC250/SC4.T1:Assessment of the systematic review for Eurocode 4 by Projectteam SC4.T1. (CEN/TC250/SC4 N1662 to CEN/TC250/SC4 N1664). United Kingdom: CEN. |
 | Schäfer, M. (11 November 2015). Des bâtiments en construction mixte acier-béton: Une alternative pour les entreprises générales de construction [Paper presentation]. Journee Construction Acier 2015, Luxemburg, Luxembourg. |
Schäfer, M., & Riedinger, J. (11 November 2015). Construction du Centre de Remisage et de Maintenance de la gare de Luxembourg [Paper presentation]. Journée Construction Acier 2015, Luxembourg, Luxembourg. |
 | Schäfer, M. (2015). Design rules for slim-floor girders considering the composite behaviour. In J. Mäkinen (Ed.), The 13th Nordic Steel Conference (NSCC-2015) (pp. 121). Tamoere, Finland: Tampere University of Technology. Peer reviewed |
 | Schäfer, M. (May 2015). Schubtragfähigkeit und M-V Interaktion von Flachdecken mit integrierten hohlkastenförmigen Stahlprofilen - Ansatz eines hybriden Fachwerkmodells zur Querkraftbemessung. Stahlbau, 84. Jahrgang (Heft 5), 314-323. doi:10.1002/stab.201510268 Peer Reviewed verified by ORBi |
 | Schäfer, M. (01 April 2015). Zur Biegebemessung von Flachdecken in Verbundbauweise. Stahlbau, Stahlbau 84 (Heft 4), 231-238. doi:10.1002/stab.201510259 Peer Reviewed verified by ORBi |
 | Schäfer, M., Widong, M., & Klein, C. (01 March 2014). Parking Belval-Université - ein P&R-Parkhaus, das die Grenzen in Europa neu definiert. Stahlbau, Stahlbau 83 (Heft 3), 149-157. doi:10.1002/stab.201410145 Peer Reviewed verified by ORBi |
Schäfer, M. (11 November 2013). Comment le transfert scientifique mène au parking le plus moderne…l’optimisation d’un projet [Paper presentation]. Les Jeudis des Sciences, Colloqium Generale, Lecon 188, Luxemburg, Luxembourg. |
Schäfer, M. (November 2013). La construction métallique mixte un système allégé innovant [Poster presentation]. Journée Construction Acier 2013, Luxemburg, Luxembourg. |
Schäfer, M. (2012). Un parking en construction mixte [Paper presentation]. Visite Chantier: Visite du laminoir et du chantier du nouveau parking P&R Belval, Esch-Belval, Luxembourg. |
Schäfer, M. (2011). Zur Bemessung von Flachdecken mit integrierten Stahlhohlprofilen im Brandfall. In Festschrift Hanswille (pp. 381-391). Wuppertal, Germany: Institut für Konstruktiven Ingenieurbau, Bergische Universität Wuppertal. |
Hanswille, G., Schäfer, M., & Bergmann, M. (2010). Verbundtragwerke aus Stahl und Beton - Bemessung und Konstruktion - Kommentar zur DIN 18800-5 Ausgabe März 2007. In U. Kuhlmann (Ed.), Stahlbau Kalender 2010 (pp. 243-422). Berlin, Germany: Ernst und Sohn Verlag. Peer reviewed |
Schäfer, M. (2010). Verbundtragwerke aus Stahl und Beton - Bemessung und Konstruktion - Kommentar zur DIN 18800-5 [Paper presentation]. Stahlbau Kalender Tag 2010, Stuttgart, Germany. |
Schäfer, M. (2009). Construction mixte dans les bâtiments au Grand-Duché de Luxembourg. infosteel. |
Hanswille, G., & Schäfer, M. (November 2007). Zur praktischen Ermittlung der Verformungen von Verbundträgern und Flachdeckensystemen unter Berücksichtigung der Nachgiebigkeit der Verbundfuge. Stahlbau, Jahrgang 76 (Heft 11). Peer reviewed |
Schäfer, M. (2007). Zum Tragverhalten von Flachdecken mit integrierten hohlkastenförmigen Stahlprofilen [Doctoral thesis, Bergische Universität Wuppertal]. ORBilu-University of Luxembourg. https://orbilu.uni.lu/handle/10993/12290 |
Hanswille, G., & Schäfer, M. (2006). Zur Bemessung von Slim-Floor-Konstruktionen. Vision. Peer reviewed |
Hanswille, G., & Schäfer, M. (2005). Verbundtragwerke aus Stahl und Beton - Bemessung und Konstruktion - Kommentar zur DIN V 18800-5, Stahlbaukalender 2005. In U. Kuhlmann (Ed.), Stahlbaukalender 2005 (pp. 237-453). Berlin, Germany: Ernst & Sohn Verlag. Peer reviewed |
Schäfer, M. (2005). Zur Bemessung von Flachdecken [Paper presentation]. Arbeitssitzung, Arbeitsausschuss Verbundbau, Wuppertal, Germany. |
Schäfer, M. (2005). Verbundtragwerke aus Stahl und Beton - Bemessung und Konstruktion [Paper presentation]. Stahlbau-Kalender-Tag, Stuttgart, Germany. |
Hanswille, G., & Schäfer, M. (2003). Stahlbaulehrprogramm 2003, Verbundkonstruktionen aus Stahl und Beton. In Stahlbaulehrprogramm 2013 (Stahlbaulehrprogramm 2003). Düsseldorf, Germany: Stahl-Informations-Zentrum. Peer reviewed |
Lungershausen, H., Schäfer, M., Bonifas, E., & Müller, M. (2001). Tragwerke aus Beton, Stahlbeton und Spannbeton; mit Formeleditor, Kommentare und Anwendungshilfen. In H. Lungershausen (Ed.), Tragwerke aus Beton, Stahlbeton und Spannbeton; mit Formeleditor, Kommentare und Anwendungshilfen (2nd ed). Berlin, Germany: Beuth-Verlag. |
Lungershausen, H., & Schäfer, M. (2001). Einführung der neuen DIN 1045-1 [Paper presentation]. DIN Seminare, Neumarkt/Oberpfalz, Germany. |